Synchronous Serial Tap
Passive Multi-Interface Synchronous Serial Tap
ImageStream's multi-interface synchronous serial tap is used to passively monitor a wide range of full-duplex synchronous serial interfaces including V.35, RS232, and RS422 with X.21, EIA530, or RS449 physical interfaces.
Like all passive taps, ImageStream's multi-interface synchronous serial tap provides automatic data circuit pass-through when the monitoring station is powered down or disconnected. This means that many taps can be installed, and monitored only when needed by connecting a portable monitoring station.
The tap is designed to work with ImageStream's PCI 410 serial monitoring card. It takes power directly from the monitoring card, which simplifies cabling for OEM applications. The passive serial tap provides native X.21 DTE and DCE interfaces, so a standard X.21 cable can be used to connect the tap to the line. Adapter cables are used to support V.35, RS232/EIA530, and RS449 interfaces.
Part Numbers
TAP-SE-DB15 - Multi-interface serial monitoring tap
400060-RTS-CTS - 6 ft (2 m) synchronous serial tap cable (RTS/CTS)
400060-DTR-DCD - 6 ft (2 m) synchronous serial tap cable (DTR/DCD)
400057 - V.35 adapter cable
400063 - RS232/EIA530 adapter cable
400064 - RS449 adapter cable
800217G10 - PCI 410 multi-interface synchronous serial monitoring card
|
|
|
|
Download
|
|
|
The Network
Monitoring
White Paper
|
|
|
|
|
|
CompactPCI
Systems
Publishes
Article
on Inetics
(formerly
SAND)
|
|
|
|
|
|
